170 degree AHD 1920x 1080p car rear view camera flip metal shell black car reversing fisheye lens camera

170 degree AHD 1920x 1080p car rear view camera flip metal shell black car reversing fisheye lens camera

Features: *AHD1080P parking camera: 1920*1080P resolution, high definition, IP68 waterproof. * Real fisheye 6 glass lens, 170-degree wide viewing angle, no blind spots, automatic image calibration function to prevent spherical images, making reversing safer. *Supports AHD and CVBS video signals — This car rearview camera can be used with AHD monitors. Its output video signal defaults to AHD1080P. If you need to connect a CVBS monitor, please cut the brown cable on the camera and reconnect the power supply. *Fit for any Car model. Camera Real Shots:   Installation location: • How to check whether the Android unit supports AHD-1080p camera? Go to Car settings >> Factory settings >> Reverse…

Description

Features:

*AHD1080P parking camera: 1920*1080P resolution, high definition, IP68 waterproof.
* Real fisheye 6 glass lens, 170-degree wide viewing angle, no blind spots, automatic image calibration function to prevent spherical images, making reversing safer.
*Supports AHD and CVBS video signals — This car rearview camera can be used with AHD monitors. Its output video signal defaults to AHD1080P. If you need to connect a CVBS monitor, please cut the brown cable on the camera and reconnect the power supply.
*Fit for any Car model.

Camera Real Shots:

 

Installation location:

• How to check whether the Android unit supports AHD-1080p camera?

Go to Car settings >> Factory settings >> Reverse (picture) settings >> Select AHD1080P

Support Waterproof

3 Control Function:

●Green line:
The camera comes with a guide wire by default, cut the green cable can remove the parking line.
●Brown line:
The camera outputs AHD1080P video signal by default, and it can be switched to CVBS video signal by cutting the brown wire.
●White line:
The white cable controls the mirror function. Cut the white cable to switch images left and right.

●Note: After cutting any wires, please reconnect the power supply.

Tips:

Changing the signal will not reduce the camera angle. The camera angle of the CVBS signal is also 170 degrees.

Easy installation method:

The camera is installed using a 4PIN integrated cable, which is plug-and-play and easy to install.

Installation Steps:

1. Find a suitable angle to mount the parking camera (Fit for Front/Rear/Left/Right), then secure the nuts and bolts in place.
2. Connect the power cord to the backup light or brake Light or Left/Right signal light power supply.
3. Connect the 6m extension cable of the parking camera to the head unit/other monitor of the car.
4. Start the vehicle and reverse gear to test the camera.
5. Reinstall the console/other monitor.

AHD Camera Feature:

* The Camera fit for Front /Rear/Left/Right installation location for Car.
* Chips components : SC 1346.
Support Front Rear Mirror Image Control.
* Viewing angle: Fisheye 6 glass lens. Real 170 degrees viewing angle, no worry about blind spot area, IP68 waterproof.
* Effective pixels: AHD1920*1080P, CVBS 1280*720P.
* Signal format: NTSC / PAL
* Image resolution: 200W Pixels
* Video output: AHD Video Signal or CVBS Signal .
* Night Vision: Starlight Night Vision. The visible distance is greater than 10 meters.
* Night Vision Image : Automatic Gain Control, Auto White Balance, Auto Backlight Compensation.
* Lens : 14/16MM Fisheye 6 glass Lens.
* Low illumination: 0.01Lux
* Signal to noise ratio: ≥69dB
* Working power supply: DC12V~24V/2A
* Working temperature: -20°C ~ +70°C
* Maximum power: 3W

Reviews

There are no reviews yet.

Be the first to review “170 degree AHD 1920x 1080p car rear view camera flip metal shell black car reversing fisheye lens camera”

Your email address will not be published. Required fields are marked *