-
Cómo ver la cámara de respaldo a pedido
Normally, the backup camera turns on when the vehicle gear is in reverse.That is due to the backup cameras are powered by the reverse backup lights and the monitor is triggered to view the backup camera when the gear is in reverse. However, consider a situation where a vehicle is pulling a trailer and the…
-
No video. Pantalla negra.
Problem: Often at the end of a backup camera installation, one sees a black screen, blue screen or no video signal when the monitor switches to the backup camera mode. Cause: Troubleshooting: Have you done bench testing before installation? It is rare but the camera may be dead. Remove the camera and connect it directly…
-
Camera works on bench but not when installed.
Normally, a backup camera is powered by the same power line as the backup lights and powered to provide video when a gear is put in reverse and backup lights come on. 12VDC is a normal power requirement for backup cameras. Modern automobiles have many electronic control units (ECUs) and a Controller Area Network (CAN…
